| KT45Q with options |
| Android OS |
| OS | Android 5.1 |
| Hardware |
| Core board | CPU | Quad-core 1.3Ghz
ARM® Cortex-A53 (LPDDR2 and LPDDR3) |
| WWLAN | FDD B1B3B7
TDD B38B39B40
WCDMA B1B2B5B8
EVDO BC0
GSM B2B3B5B8 |
| Flash ROM | 8GB |
| RAM | 1GB DDR3 |
| Motherboard |
| Display @ | 4.5inch IPS 480*854 |
| touch screen | Multi-point touch capacitive screen |
| Form Factor | Bar type classical PDA,Industrial appearance |
| GPS | Supports GPS/QZSS/SBAS (WAAS/MSAS/EGNOS/GAGAN). Support Full AGPS |
| DGPS (please check options) |
| Bluetooth | v2.1+EDR / 3.0+HS / v4.0 Low Energy (LE) |
| WiFi | 2.4Ghz 802.11 b/g/n |
| External Interface | USB HOST/RS232(Customized) |
| Protection class | IP65 |
| Drop resistance level | 1.5m |
| Camera Function | Camera | 8MP Camera |
| Video | Support still image and video capture |
| Sensor | G-sensor | YES |
| Keypad | Front | 17 |
| Side | 4 |
| Interface | Mini-USB connector | USB2.0 connection |
| SIM card slot | *2 |
| TF card slot | Yes |
| power jack | Yes |
| Audio Jack | Yes |
| Battery | Type | rechargeable Li-ion battery 4500mAh |
| Standby Time | 500hours |
| Calls Time | Up to 6hours |
| Charging Time | 4 hours |
| Physical Characteristics | Dimension | 175*76*27mm |
| Weight | >400g with battery (according config) |
| | | | | | |
| OPTIONS |
| DGPS | ublox LEA-6T (with RTK) |
| MSR(Optional) | Compatible with one, two, three track(without PCI, EMV security certification) |
| PSAM(Optional) | ISO7816 (SIM card interfance) |
| IC card reader(Optional) | ISO7816 ID-1 |
| Fingerprint reader | option 1 | TCS1G |
| option 2 | TCS1B |
| Printer | 2 inch Direct thermal line printing |
| Far Infrared Meter Reading (Optional) | IEC62056-21(IEC1107) communication protocol |
| 433Mhz module | Require customers to provide 433Mhz wireless modules or specifications. |
| zigbee | Require customers to provide 433Mhz wireless modules or specifications. |
| RFID Reader | option 1 | LF RFID(134.2khz, ISO11784/11785, FDX-B/HDX) |
| option 2 | LF RFID(125KHz) |
| option 3 | HF RFID(13.56MHz ISO 1443A/B ISO 15693) |
| option 4 | NFC(include 13.56MHz ISO 14443A/B ) |
| option 5 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) / ISO18000-6A,B compatibility in direct mode----with AS3992 shipset |
| option 6 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) ----with R2000 shipset, Long distance reader. |
| option 7 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) -with PR92000 shipset |
| Barcode scanner | option 1 | NEWLAND:EM1300(1D barcode reader) |
| option 2 | NEWLAND:EM3000(1D/2D barcode reader) |
| option 3 | Symbol:SE955(1D laser barcode reader) |
| option 4 | HoneyWell:N4313 (1D laser barcode reader) |
| option 5 | Symbol: SE4500(1D&2D barcode reader) |
| Printer Module Specifications |
| Printing method | Direct thermal line printing |
| Paper width | 57mm |
| Print width | 48mm |
| Resolution Ration | 8 dots/mm (384 dots/line ) |
| Life of printing head | 5,000,000 -15,000,000 character lines |
| Printing speed | 40-60mm/sec |
| Character size | 8*16dots , 12*24dots |
| Paper supplied | 57mm wide , 22mmø |
| Interface | Serial RS232C/TTL |
| Operating temperature | 0℃--50℃ |
| Storage temperature | -20℃ -- 60℃ |
| Operating humidty | 10%--80% |
| Storage humidty | 10%--90% |
| Fingerprint Module Specifications |
| TYPE1 | TCS1G |
| Touchchip Sensor | Interface | 8 bit parallel interface
20-pin flex connector |
| Power(typical) | 4.5-4.6V supply
20mA during capture |
| Touchchip Module | Interface Options | 5-soldier pads for USB only @ 5V
12-pin flex: USB,SPI,UART @ 3.3V (optional) |
| Power(typical) | 3.0V-3.6V
80mA(capture,match)
Standby(USB) :1350 uA
Standby(UART/SPI) : 1150uA
Wake-up time: <15 ms (Sleep to imaging) |
| Digital ID Hardware Engine | Biometric Companion Processor | - 1:1 match time ~50uS per template
- 1:100 match time <2s typ.
- On-board NVM storage for up to 100 templates
- More than 100,000 erase/write cycles
- More than 20 years data retention |
| Common Spec | Fingerprint Image | 12.8×18.0mm(256×360pixels)
508dpi,8-bit greyscale |
| Sensor Coating | gold coating,FIPS-201 Compliant (EIM) |
| Package Size | 23 mm x 35 mm x 4.1 mm |
| ESD | IEC 61000 - 4.2 level 4, +/- 15KV air, +/- 8IKV contact |
| Ingress Protection | IP 65 (water/dust protection) |
| Environmental | • Operating temp: -30 to +70 C
• Storage temp: -30 to + 125 C
• Humidity: 5% - 93% non-condensing
• ROHS, low halogen |
| TYPE2 | TCS1B |
| Touchchip Sensor | Interface | 8 bit parallel interface
20-pin flex connector |
| Power(typical) | 4.5-5.5 supply
20mA during capture |
| Touchchip Module | Interface Options | 5-soldier pads for USB only @ 5V
12-pin flex: USB,SPI,UART @ 3.3V (optional) |
| Power(typical) | 3.0V-3.6V
80mA(capture,match)
Standby(USB) :1350 uA
Standby(UART/SPI) : 1150uA
Wake-up time: <15 ms (Sleep to imaging) |
| Digital ID Hardware Engine | Biometric Companion Processor | - 1:1 match time ~50uS per template
- 1:100 match time <2s typ.
- On-board NVM storage for up to 100 templates
- More than 100,000 erase/write cycles
- More than 20 years data retention |
| Common Spec | Fingerprint Image | 12.8×18.0mm(256×360pixels)
508dpi,8-bit greyscale |
| Sensor Coating | SteelCoat(black coating) EIM-Lite |
| Package Size | 23 mm x 35 mm x 4.1 mm |
| ESD | IEC 61000 - 4.2 level 4, +/- 15KV air, +/- 8IKV contact |
| Ingress Protection | IP 65 (water/dust protection) |
| Environmental | • Operating temp: -30 to +70 C
• Storage temp: -30 to + 125 C
• Humidity: 5% - 93% non-condensing
• ROHS, low halogen |
| Certificate | STQC |
